Spray Wrap MVP is a fluid-applied air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and most other building wall assemblies. Use Spray Wrap MVP as the primary air barrier over above-grade wall assemblies prepared with Joint & Seam Filler and/or FastFlash.
.
VB is a fluid-applied air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and most other building wall assemblies.
AirDam is an STP (silyl-terminated polymer) sealant formulated to create a long-lasting, weather-tight seal that prevents moist outside air from entering, and conditioned indoor air from escaping around window and door assemblies. Use AirDam in all rough openings prepared with R-Guard FastFlash.
FastFlash is a liquid flashing membrane available in gun or rollergrade. Use FastFlash in rough openings, to fill joints and seams, to counter-flash waterproofing and air barrier components in new or existing wall assemblies, and to seal around penetrations. Use FastFlash independently or with compatible R-Guard products to prevent the unwanted movement of water and air through building envelopes.
Joint & Seam Filler is designed to fill openings and create transitions where flexible reinforcement is required to bridge larger gaps and provide continuous support of fluid-applied flashing membranes, waterproofing or air barrier components.